Welcome to Dongguan Dingshen Metal Materuak Co.,Ltd. ! 中文网站 English
Dongguan Dingshen Metal Materuak Co.,Ltd.
Category
∷ Aluminum rod ∷ Aluminum plate ∷ Aluminum profile ∷ Electrode Welded Copper Material ∷ Copper Alloy Material
ContactUs
Service hotline:

139-2686-2859

E-mail address:

Dingshenjs@163.com
Hot Product http://www.dgdsjs.com/
2017 aluminium bar
Our company supplies 2017 aluminium sheet 6-150 mm, 2017 aluminium bar 8-100 mm, special can be determined.


Dingshen 2017 aluminium alloy characteristics and scope of application:


It is low strength hard aluminium and the main rivet material for riveting aluminium alloy structure. After quenching and natural aging, the strength is lower, but it has high plasticity and good technological properties (high plasticity in hot state and good plasticity in cold state), the weldability is the same as that of 2A11; the machinability is acceptable and the corrosion resistance is not high; rivets are riveted after quenching and aging, and are not subject to the time limit after heat treatment in the riveting process.



Chemical composition of 2017 aluminium alloy:



Aluminum Al: Allowance



Silicon Si: <0.50



Copper and copper: 2.2-3.0



Mg: 0.20-0.50



Zinc and zinc: <0.10



Manganese and Manganese: <0.20



Titanium: <0.15



Fe: 0.000-0.500



Note: Individual: <0.05; Total: <0.10




Mechanical properties of 2017 aluminium alloy:



Tensile Strength_(MPa): > 186
Product: Aluminum rod    Aluminum plate    Aluminum profile    Electrode Welded Copper Material    Copper Alloy Material   
About: Company profile    Aluminum stock    Aluminum rod inventory    Service process    Contact    Application    Inventory
CopyRight © Dongguan Dingshen Metal Materuak Co.,Ltd.[www.dgdsjs.com/] All rights reserved.   Phone:0769-82288465   Mobile:13926862859